Author Topic: Denon AVR 7200  (Read 121 times)

FookLai

  • Newbie
  • *
  • Posts: 3
Denon AVR 7200
« on: 26 July, 2022, 15:58:11 pm »
  • [applaud]
  • [smite]
  • Friends, I had this Denon AVR 7200 for years, recently the HDMI output give up on me. It started off with the main output, then the second output die also, after that even zone 2 output was also spoilt. The HDMI input has no issue, when the UHD loaded, I can still hear the sound going into AVR, just that I can see no image from my BenQ project.

    Seeking your opinion here, is it still worthwhile to repair this receiver? It has served me well for years, the sound has been fantastic (to me).

    Anyone has similar experiences before and know the cost of repairing this?

    BadEnglish

    • Hero Member
    • *****
    • Posts: 2,148
    • Bad Since 20th Century. Set to Expire in 21th
    Re: Denon AVR 7200
    « Reply #1 on: 26 July, 2022, 18:29:29 pm »
  • [applaud]
  • [smite]
  • Last time, I asked about upgrading to 7200A about 1k. So if I were you I might get a new one 8500A

    FookLai

    • Newbie
    • *
    • Posts: 3
    Re: Denon AVR 7200
    « Reply #2 on: 26 July, 2022, 23:14:58 pm »
  • [applaud]
  • [smite]
  • Paiseh, mine is actually 7200A....

    BadEnglish

    • Hero Member
    • *****
    • Posts: 2,148
    • Bad Since 20th Century. Set to Expire in 21th
    Re: Denon AVR 7200
    « Reply #3 on: 26 July, 2022, 23:19:41 pm »
  • [applaud]
  • [smite]
  • Then I think worth to ask for quote  ;D

    Audio

    • Administrator
    • Hero Member
    • *****
    • Posts: 731
    Re: Denon AVR 7200
    « Reply #4 on: 29 July, 2022, 14:34:56 pm »
  • [applaud]
  • [smite]
  • Friends, I had this Denon AVR 7200 for years, recently the HDMI output give up on me. It started off with the main output, then the second output die also, after that even zone 2 output was also spoilt. The HDMI input has no issue, when the UHD loaded, I can still hear the sound going into AVR, just that I can see no image from my BenQ project.

    Seeking your opinion here, is it still worthwhile to repair this receiver? It has served me well for years, the sound has been fantastic (to me).

    Anyone has similar experiences before and know the cost of repairing this?

    Go to Setup.  Can you see the Denon setup menu on your projector?


    (Audio)