ghemml
Member
It has been a while time since I done any loudspeaker design. But I made this for Martin Electronics at Burlington Square.
Borrowed some missing gears from a friend like Mic stand, a fixed dB preamp.
Ran all measurements using ARTA, using near field and far field gated impulse response of 3.9ms to 4.2ms in my given workshop using Dual channel calibrated measurements.
Post processed and calculated Freq Response and phase shift for each individual drivers and their actual dB @1m/2.83Vrms.
Woofer
Tweeter
Exporting all measurements to LinearX LEAP 5
Actual Measured vs simulated (Gated), response 500hz and above. ±5% to 10%
Borrowed some missing gears from a friend like Mic stand, a fixed dB preamp.
Ran all measurements using ARTA, using near field and far field gated impulse response of 3.9ms to 4.2ms in my given workshop using Dual channel calibrated measurements.
Post processed and calculated Freq Response and phase shift for each individual drivers and their actual dB @1m/2.83Vrms.
Woofer
Tweeter
Exporting all measurements to LinearX LEAP 5
Actual Measured vs simulated (Gated), response 500hz and above. ±5% to 10%
