Buy 3D printer, must use use of it to improve Hi-Fi mah.
My Avalon speakers came with spikes but DJQ want me to try FE Cerabase. The Avalon comes with 3 circular slots (36mm) at the bottom to hold onto the spikes but the FE Carabase footers have a 45mm circular base. Ah!! Now I got 3D printer, it's time to put it into good use.
The post above shows my Version 1 and Version 2 of these adapters, very poor finish.
This is version 4 of my speakers footer adapters.
Finally, I got it right!
First 3 completed by the printer
Pretty hor? Like Raspberry Jelly.
Washing in the washer. This time, I used Isopropyl Alcohol, though the resin is water washable.
UV curing of the completed footer adapters, first batch.
First batch of 3 finished. The 2 pieces you see at the rear are the Version 3. Not so nice.
Stereo set of 6 pieces completed.
Preparing the new adapters for installation on these Cerabase Classic.
Mounted and sounds fantastic now.
I am so happy now!!
Thanks DJQ for convincing me and loaning me the footers. It certainly made the difference.